2021 HammerCat 35
Comments: The HammerCat 35 is the next generation power catamaran: lightweight, fuel efficient and fast. No need for quad engines, 2 x 350 HP power this cat over 50 mph. With 400 Gl of fuel, the range is over 600m at 25-30 knots. Epoxy composite construction with carbon fiber hardtop.
Base price of $349k is ready to fish, incl. Suzuki 350 dual prop engines & electronics. FOB south FL.
Contact us for availability and option pricing.
phone +1 954-260-4913
2021 HammerCat 35:
-Fuel and operating cost make fishing expensive: our hull design and construction technique are unique, just take a look at the ‘working / fishing areas’: large walk-around decks, wide gunnels, enormous 85 sqft aft-cockpit and 4 x fish-boxes plus an optional coffin box.
-Other sportfish-power catamarans use a “quad engine” set up on their similar sized models and they weight up to 14,000 Lbs. The HammerCat 35 is build out of epoxy with vacuum fused e-glass, resulting in the “wet weight” of the vessel at 8,500 Lbs. This means that we can use half the horsepower compared to our competition and still get the same performance, yet ensuring the strength and durability required for offshore sport fishing.
-With twin 350 HP engines, and 400 Gallons of fuel the range is >600m at 25 knots. If needed, the HammerCat 35 can plane on one 350HP engine. Should you be way offshore, and one engine fails, you can come back at a decent speed.
-The HammerCat 35 is unsinkable: 43 cubic feet of XPS foam ensures that the HammerCat 35 will remain afloat if you hit a container / underwater object at 40 knots
-The hardtop of the HammerCat 35 measures 10’ x 12’ and weights just 150 Lbs., so there is no weight high up which can influence the ride in offshore conditions. The hardtop is much larger & wider than on most other sport-fish-center consoles so you and your crew are protected from the sun / elements.
- The HammerCat is built for longevity using construction techniques normally only seen on offshore racing yachts.
-Epoxy has three to five times the flexural strength of polyester/ vinylester resins making the HammerCat stronger, more durable, lighter and thus more agile, seaworthy, fuel-efficient and more fun to drive. Epoxy resin is 25 percent stronger than the polyester resin used in most boatbuilding, with higher elongation properties for greater durability.
-The construction methods and materials employed by Hammer Yachts create stronger, yet lighter hulls that require less horsepower than the competitors and enjoy far better fuel efficiency getting up to twice the miles per gallon of similar boats at speeds of 25-50 knots.
-The HammerCat 35 has classic timeless lines with her Carolina bow, flared hull and great curves.
-LED downlight on foredeck and aft deck
-LED downlight under hardtop (blue / white)
-Tri-color light on hardtop
-Rockford Fosgate soundsytem with 4 speakers in hardtop
-Under gunnel LED courtesy lights
-Optimus steering system
-2 x AGM batteries for engine
-Gel service battery
-4 x waterproof USB chargers at helm
-2 x 200 Gl fuel tanks
-2 x 350 HP Suzuki engines
-12 x rod holders in gunnel
-Aft facing tackle station with sink / faucet
-Rocket launcher incorporated in hardtop / 8 rods
-5 x Llebroc "SX" seats at helm
-Llebroc bench seat forward of helm
-50Gl water tank and 12V pump
-Carbon fiber dashboard 51" x 18"
-Carbon fiber panel for switches and engine controls
-2 x coolers that can be upgraded to live bait wells on transom / 65 Gl each
-4 x insulated fix boxes 2' x 6'
-3 x bow lockers on fore deck
-6 x foldable stainless steel cleats
-6 x cupholders at helm, 2 x aft and 4 x forward
-Unsinkable hull. Hand laid epoxy and resin infused hull.
-Marlin door (removable)
-Self draining cockpit
-Rubrail around vessel