ORKNEY PILOTHOUSE 20
Fitted with Yamaha F60FETL (60hp) four stroke outboard engine
(Note: Outboard isn't fitted yet, so could still have a different size fitted - Max 80hp)
Originally developed from the highly regarded Day Angler 19+, the Pilot House 20 is now in its fourth generation and continues to be a popular size model in the range with Cruisers and Fishermen alike.
With a generous beam along the waterline spray chines it offers good stability without a significant increase in wetted surface.
The hull features a reasonably deep forefoot with fine forward sections and pronounced flare developing into a moderate V aft. The resulting shape, combined with a moderate beam/length ratio, results in a dry, comfortable ride in rough seas.
The fully moulded cockpit has safe high coamings and is self draining with useful stowage under hinged lids. Wide side decks with practical 'angled-in' toe rails and pilot style coach roof handrails make going forward to the foredeck simple and secure.
The wheelhouse offers commanding all round views from a forward facing Helm and Co Pilot seat.
For further information or to arrange a viewing please contact us on +44(0) 1932 225034
or email email@example.com
or visit our website at www.thamesboathouse.co.uk
More boats for sale at www.thamesboathouse.co.uk/boats-for-sale/
Hull, deck & ancillary mouldings are constructed in hand lay-up GRP. Isophthalic resin is used in the hull which is stiffened below the waterline by bonded-in bulkheads and longitudinal stringers. The cabin and cockpit are formed by GRP modules which are bonded into the hull to increase rigidity. One piece moulding utilises complex core stiffening and is both bonded and mechanically fastened to the hull.
Orkney Oxford Blue hull
Orkney Silver Grey topsides & superstructure
Boot top in white
Standard Equipment & Deck Equipment
Stainless steel bow roller
Bow & stern mooring cleats
Stainless steel handrails from wheelhouse to cabin top
Stainless steel bulkhead grab handles
Opening hatch on forward coachroof
Heavy duty all round PVC 'D' section fendering with stainless steel end caps
Constructed in GRP with moulded-in non-slip surface to walking areas
Full self draining through transom scuppers
Inspection hatch giving access to bilge
Moulded steps/seats to side decks incorporated lidded lockers
Under floor fuel tank locker with gas strut assisted lockable lid
Stowage lockers with hinged lids
Outboard well to suit single outboard
Lockable GRP alloy framed bulkhead cabin door with window
Alloy framed toughened glass windows all round
Helm station to Starboard
Fire extinguisher storage
Co-pilot seat to Port with storage under
Step to cockpit with battery storage under
Helmsman seat with stowage under
Vinyl upholstered base cushions to berth and seating area forward with storage under
Area with hinged lid ahead of steering console to take optional toilet
Windscreen wiper for helmsman only
4-gang electric switch panel with 12v power socket
Fitted manual bilge pump
Thames Boat House Ltd (Walton Marine) offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel or it's suitability for use. A buyer should instruct his agents and surveyors to investigate such details as the buyer desires validated. Unless otherwise stated the vendor is not selling in the course of business and this vessel is offered subject to prior sale, price change, or withdrawal without notice.