*Base pricing for new boat from factory not including customization or delivery.
The Xp 38 delivers an unrivalled sailing experience in a dual-purpose cruiser-racer. This model after launching, quickly developed into a global fleet, with boats sold from Japan to Hungary, Switzerland to Australia. It was nominated for Boat of the Year, with one judge commenting: “The main reason you own this boat is because you love sailing. Seeing it underway, it just lights you up.” (Tim Murphy, Cruising World).
This enjoyment comes from the Xp 38’s high level of responsiveness, thanks to high ballast ratio, light and stuff epoxy infusion construction and carbon keel structure, and controllable sail plan. High stability and ease of handling makes the Xp 38 a rapid and comfortable yacht to cruise with excellent sea-keeping in all conditions, as well as a high performance racing design for both inshore and offshore. It has scored a host of race victories under both IRC and ORC.
Please contact Ashley Yachts at (843) 577-7222
Características adicionales, equipo e información:
Marca del motor: Yanmar
Año de construcción: 2017
Modelo del motor: 3YM30AE
Tipo de motor: Intraborda
Tipo de motor/combustible: Diesel
Hélice: Hélice abatible
Tipo de transmisión: Sail drive
Potencia del motor: 29 HP
Número de depósitos de agua dulce: (69 Galones)
Número de depósitos de combustible: (46 Galones)
Número de camarotes: 3
Número de aseos: 1
Manufacturer Provided Description
The Xp 38 was launched in 2011 and quickly developed into a global fleet, with boats sold from Japan to Hungary, Switzerland to Australia. It was nominated for "Boat of the Year", with one judge commenting "The main reason you own this boat is because you love sailing. Seeing it underway, it just lights you up." (Tim Murphy, Cruising World).
X-Yachts are designed by sailors, for sailors. Every Xperformance yacht is created to perform superbly in all conditions and in all sail configurations. However, many of the very same factors which make the Xp models race winners, also ensure that they are enjoyable fast cruisers.
Built in sandwich construction with structural foam core
Bi-directional and uni directional E-glass strategically positioned for strength and weight optimization
Solid laminate in high stress areas in way of keel top, sail drive and rudder tube.
Outer surface of hull in white sprayed Gel coat (RAL 9010 white) with 3 waterlines in dark blue Gel coat (RAL 5011 dark blue)
Hull epoxy infused in female moulds for optimum consolidation and high quality surface finish
Structural bulkheads in marine plywood varying in thickness from 16-20 mm bonded to hull
Structural liner moulding laminated into hull. Carbon fibre reinforcements to absorb all loads from keel and mast
Single point hoist for easy and safe lifting and launching of the yacht
Bathing ladder in stainless steel mounted on transom
Hull recessed port lights - Rectangular (6 pcs)
Built in sandwich construction with structural foam
E-glass with bi and uni-directional cloth strategically positioned for strength
Outer surface of deck in white sprayed Gel coat (RAL 9010 white)
Deck and locker lids moulded in female moulds for highest quality surface finish
Teak, vacuum applied, 9 mm nominal thickness on cockpit sole and seats
Variable height bulwark incorporated in deck/hull design providing safe toe rail forward and comfortable hiking aft
Anchor locker - drained area with space for anchor & optional chain.
Gas locker compartment, for 2 x 3 kg gas bottle, drained to the sea
Liferaft can be stored in stb aft cockpit locker. Second liferaft can be stored in port aft locker (max size tbc). Both lockers are hinged aft.
Gas springs fitted to forward and aft cockpit lockers (4 pcs )
Halyard locker recessed into cockpit
Cockpit floor locker, hinged lid, for optional cockpit table
Xp 38 - Three cabin layout with sliding nav station
The interior will consist a combination of composite and wooden units.
Utilising First class craftsmanship and lamination techniques.
Pre-selected, top grade T-teak veneer, hand polished and varnished to satin finish
T-teak veneered main bulkheads
White laminate bulkheads used inside bathrooms, on aft bulkhead and centre bulkhead in aft cabins
GRP deck head liner with integrated light fittings. Pleated blinds hidden behind soft panelling on coach roof side
GRP hull liner including heads floor and shower tray
Floorboards of 16 mm marine plywood with imitated teak and Gaboon plywood inlay stripes and inspection hatches to access bilge.
Companionway (GRP moulding) with steps of curved unvarnished teak
Handrails by entrance and alongside coach roof port lights in main cabin
Oceanair blinds incl fly screen fitted to skylights (6 pcs)
Large double berth. Marine plywood mattress supports. Mattresses in 120 mm comfort foam. Max size 205 x 178 cm
2 x Large double composite wardrobe with shelves and hangers on starboard.
2 x night table with lower storage on port side
Freeboard shelves above berth
Storage space under owners berth for bedding
Freeboard lined with white vinyl covered 7 mm panels
To port: Long L-sofa (240 cm x 61 cm) and dining table, foldable, with centre box with 2 drawers, one for bottles
To starboard - Standard sliding navigation table (75cm x 56 cm) with storage for navigational stationary and instrument.
Sliding navigator's seat with storage space for additional navigational and emergency equipment. The "sliding system" enables the navigator to face forward whilst sailing [sofa length with seat in aft position = 135 cm, sofa length with seat in forward position = 175 cm].
All sofa fronts in white GRP
To starboard - Optional 3 cabin version with fixed aft facing nav station: Sofa length of 175 cm, and drawers underneath chart table.
All sofa front covered with T-teak veneer
To starboard - Optional 2 cabin version with fixed forward facing nav station: Nav station table with drawers underneath. Sofa length of 220 cm.
All sofa front covered with T-teak veneer
Deep shelves behind the back rest including a set stainless steel book holders
Deep overhead lockers with bottom hinged openings running full length of saloon
Electrical switch board located above chart table on upper lockers.
Freeboard lined with white vinyl covered 7 mm panels
Large double berth (204 cm x 145 cm, max width) Marine plywood mattress support with ventilation holes. Mattresses 120 mm comfort foam.
Large double composite wardrobe with shelves and hangers . 84 x 70cm
Freeboard lined with white vinyl
Head & Shower Compartment
Upper cabinet fronts in heads with T-teak veneer surface
Bulkheads covered with white laminate
Tabletop and sink in a white composite moulding
Mixer taps, single lever luxury for sink and shower
Electrical pump for shower floor sump, manually operated switch
Towel rail and grab handle running around table top in stainless steel
Towel hooks and loo roll holders
Mirrors above sinks
Galley, High gloss white Composite moulding L-shaped (151 cm x 172cm).
Drawer unit with 4 drawers - top 3 drawers for cutlery and bottom drawer dedicated for tools
Sinks, rectangular recessed stainless steel with single lever mixing tap (2 pcs) including cutting boards / covers
Cool box, GRP top opened 130 l with 100 mm insulation, built in Isotherm SP, accumulator plate sea water cooled
Gimballed Gas cooker - 2 Jet - model Eno One
White surface lower lockers provide storage space for crockery and food
T-teak veneer surface upper lockers for plates and food
10mm hardened Glass splash board
Waste bin mounted under sinks
Main engine 29 HP water cooled diesel engine with S-Drive
Special engine compartment with sound insulation ensures low noise level in yacht
Engine easily accessible for service at the forward end, through companionway steps; and from the aft end via removable GRP boxes.
Folding propeller, 2-bladed bronze for S-drive
Engine control panel and throttle/gear lever placed in starboard cockpit coaming.
Engine control panel incorporates rpm meter, hour counter, acoustic alarm for oil pressure and cooling water temperature
Fuel tank in aluminium for fuel below sofa in saloon. Analogue level gauge, filter with water separator and shut-off valve and deck fill (175 litre)
12 V DC system throughout yacht
X-Yachts main switch board with 27 automatic fuses and 3 analogue meters for fuel, water and battery voltage.
12 V DC system for main engine installation
All cabling terminates in “dry” GRP box fitted behind main electrical panel for added safety
AGM batteries (total 220 Ah@12 V) securely mounted in forward cabin (2 pcs x 110Ah)
Separate engine spiral-cell battery (55 Ah, 12 V) mounted near main engine for starting of engine. Engine battery is charged by the engine.
Shore power installation with shore power inlet mounted in cockpit protected by 10A main fuse. 230V AC distribution box located in aft cabin with integrated ground fault circuit breaker/10A fuse, 230 V AC socket and switches for hot water immersion heater and battery charger.
Charger 12V/35A, mounted
Lights fitted for general purpose below deck throughout cabins
Chart table light fitted
General lights and dome spotlights integrated in inner liner
Reading lights throughout aft cabins, main cabin and owners cabin (8 pcs)
Mast and Rigging
Fractional double spreader keel stepped mast, tapered silver anodized aluminium, specially designed for Xp 38
Steaming light, Windex with light, tube for additional electrical equipment
Silver anodized boom with single line reefing and internal boom outhaul, telescopic vang and outer purchase block system
Central backstay fitted with integral backstay adjuster.
Chain plates in stainless steel fitted to bull walk/on top of hull (2 pcs)
Discontinuous rod rigging with rod turnbuckles
Rod forestay with Profurl furling drum under deck
Chain plates in stainless steel for forestay and centre backstay (2 pcs)
Spectra halyards led back to cockpit for easy handling:
Main halyard 12 mm
Genoa halyard 12 mm
Mast head spinnaker halyard 12 mm
Spectra sheets and polyester control and reefing lines:
Mainsheet 10 mm
Genoa Sheet 10 mm
Furling control line 8 mm
Reef 1 10 mm
Reef 2 10 mm
Outhaul 8 mm
Vang control line 8 mm
Flag pole, teak with bronze bushing (1 pcs)
25 m shore power cable (1 pcs)
3 kg gas bottle (1 pcs)
Fire extinguishers, dry powder of 2 kg each, fitted throughout the yacht (4 pcs) and one fire blanket (1 pcs)
Fenders, white air-filled with lanyards and X-Yachts logo (4 pcs)
Mooring ropes, polyester 20 m x 14 mm (2 pcs)
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.