As exhilarating as it is luxurious, the Extreme H2O racing catamaran seamlessly blends breathtaking performance with eye-catching design. Meticulously customized from the ground up, Extreme H2O truly stands in a category of its own.
Aesthetically arresting carbon fiber appointments throughout the cabins and structural components not only provide extreme strength, but also extreme sophistication. All of these structural and technical advancements make Extreme H2O one of the most impressive performance cruising catamarans in the world.
Take a look inside Extreme H2O today, with this 3D virtual tour of the boat: https://my.matterport.com/show/?m=ac95rafMwEn
For further information or to schedule a viewing please contact Nils Erickson at email@example.com or 619-430-8935.
Extreme H2O is the lightest and fastest Gunboat 66. The boat features a fully integrated hybrid system, C foils, T rudders, a Southern Spars rotating wing spar, aft beam traveler, retractable propeller drives, tiller steering for racing and push button mainsheet controls at all steering stations.
State-of-the-art Morrelli & Melvin foils and a powerful sail plan with masthead screecher that sheets to the forward cockpit for light air upwind performance and a full inventory of downwind furling sails make “H2O” an extremely capable catamaran in a large crossover of wind conditions. Speed and performance did not sacrifice the luxury features of this cruising catamaran - which can realize up to 30 knot sailing speeds.
The fully integrated hybrid system will allow you to depart the dock, enjoy a day of sailing and return to the dock without ever having to listen to a diesel motor. Better yet, you can enjoy a tropical night at anchorage with 30,000 BTU of air-conditioning without the noise of a generator.
Completed in 2015 – “Extreme H2O” has already raced to Mexico and Hawaii and back and is fully serviced with a new 3Di raw racing mainsail a new R1 reacher and ready for racing and cruising in the Caribbean in 2017.
“Extreme H2O” is the first Gunboat 66 to place an emphasis upon performance cruising
catamarans. A product of the Morrelli & Melvin Design & Engineering office, “Extreme H2O” was optimized for performance throughout a wide range of wind conditions. You can enjoy sailing at over 9 knots of boat speed in only 8 knots of wind on “H2O” which is unheard of on other comparably sized catamarans.
This powerful sail plan is managed with advanced sail handling systems in both the forward cockpit with 4 high speed hydraulically driven winches and at all steering stations with push button mainsail controls. In addition, the mainsheet traveler is curved along the length of the aft beam for optimum mainsail control and safety. The running sails are all controlled through bottom up or top down furling and the mainsail is reefed with state of the art locks at the head and clew.
Morrelli & Melvin designed the “C” foils to provide up to 4,000 kg of vertical lift and the “T” rudder to reduce pitching when the wave angle is forward of the beam. The “T” foils are removable while boat is in the water so the boat can be easily configured for optimum speed and comfort.
“Extreme H2O” began construction in South Africa by Gunboat. After the Gunboat facility shut down, the boat was moved to the US and completed by Westerly Marine - a custom boat builder located in Santa Ana, California. Westerly Marine specializes in carbon fiber performance vessels. Over 56,000 hours were required to complete the boat to certified standards.
Hulls: Carbon inner skin and outer skin / 25mm Corcell Sandwich
Cabin: Carbon inner and outer skin / Nomex honeycomb and Corcell sandwich
Cabin soles: Carbon / Nomex honeycomb sandwich
All secondary taping Carbon fiber / Epoxy and post cured
All laminates vacuum-bagged and post cured
Layout & Accommodations (see interior GA in photos section):
The modern interior has horizontal mahogany grain veneer and bamboo floors with carbon and Corian countertops that are attractive, but practical, in long distance cruising and racing.
3 x refrigerators
1 x freezer drawer with ice maker
Gaggenau 5 burner stove
Double stainless sink with Grohe facet
Miele whole bean coffee system
ENO gas oven
Deck & Equipment:
All Hatches by Lewmar
All Portlights by Gebo
Longeron mounted Tack line winch: manual Harken 60.2
Forward cockpit Winches: all hydraulic
Primary Winches: Harken 990.3 ST
Secondary Winches: Harken 60.3 ST
Aft cockpit winches: used for Traveler and davit lines: Harken 60.3
1 x spade S200 Anchor
1 x 100ft Chain and 200ft ¾" Rode
1 x Lewmar V5 hydraulically driven Anchor Winch
1 Danforth day anchor
Falcon 450 RIB with center console with 30HP Honda Engine
Safety / Liferafts:
2015 Ocean UltraLite 10 – PAX meeting all ISO requirements, packed in carbon hard pack & mounted on aft beam
JonBuoy bulkhead mounted recovery module with remote release at nav station and AIS
(10) qty KRU sport pro ISO manual inflation PFD/harnesses each equipped
(10) qty personal AIS / DSC transmitter attached to KRU PFD
(10) qty personal wide beam laser attached to KRU PFD
(2) qty ACR EPIRB’s (one on boat and one in life raft grab bag)
All Category 1 required safety gear for multihulls per SER requirements
(1) Oceandata system Upside Up anti capsize with mainsheet release and all the parts for a forward cockpit release system.
Manual release buttons at each helm location and forward cockpit.
Electronics & Navigation:
Forward cockpit - with 4qty 20/20 displays and 2 qty race displays all mounted on mast
Main cabin 1qty graphic display at Nav station and 1 qty graphic display in inside helm
Aft cockpit 4 qty race displays
1 H5000 barometer module
1 H5000 3D motion sensor
1 BB&G 57” mast wand
1 celesco String Pot for mast rotation sensor
1 celesco string Pot for rudder position
1 Simrad GS70 GPS
1 Furuno GP33 GPS
1 Furuno FA 150 AIS transponder and display
1 Icom M400BB VHF with integrated AIS antenna
2 Standard HX290 protable VHF
1 B&G 4G Radar
1 F250 Sat Com
2 Naauticomp 15” sunlight Monitors
2 Intense PC, window 7, RAM 8GB, Core 1.8GHz
2 copies of Expedition software
1 copy of Deckman software
2 NavNet 3D Vector MapMedia US West Coast and Hawaii Charts
1 Globe Surfer Quad band 3G
Cel phone receiver
1 Wave Wifi booster for onboard wifi
1 B&G H5000 Autopilot Computer & Controller located at interior helm
1 Raymarine Type 3 linear drive hydraulic drive
1 headstay load cell
2 shroud load cell
1 mainsheet load cell
C-Zone CAN-Bus control for non-critical electrical systems
Electrical, Power & Equipment
Hybrid system for Extreme H2O; see PDF schematic under Technology>Hybrid
2 4 cylinder Volvo D2-40 20kW generators, output of 260 – 320 VDC
2 AC High efficiency Fukuta motors with 25kW continuous and 40kW peak power, 3 phase, liquid cooled
2 AC motor Traction Controller, liquid cooled, DC input, AC motor output
1 LiFePo4 Battery Bank, 288 volt nominal, 28.8kWh, 11 enclosures, 8 cells per enclosure
1 4kW AC/DC shore power battery charger
2 250 - 320 VDC to 24 volt charger
1 100 – 400 VDC to 12 volt charger
1 250 – 320 VDC to 230 VAC inverter – liquid cooled to run all appliances (AirCon, microwave, refrigeration)
2 x 20 Gal Torrens Water heater (Heated by engine and AC)
110VA C Sockets in all Cabins and Heads
1 x 100 gallons Water 2 x 75 gallons Fuel
3 x 20 gallons Holding Tank
1 15 gallon sweet water tank
2 18 gallon hot water tanks AC or engine heated.
1 Spectra Cape Horn water maker plumbed to a 15 gallon stand alone sweet water tank
All Sails by North Sails
Mainsail #1: 186m2, 3Di, 760i (37,200 dpi) with 2 offshore plys, 3 reefs, 6 full C-Tech carbon battens
Mainsail #2 (new Jan 16) 193m2, 3Di, 870 RAW, 2 offshore plys, 3 reefs, 5 full C-Tech carbon battens
Fractional screecher 106m2, 3Di, 760i, RAW, 19,600 dpi, on vectran luff cable
Mast Head screecher 150m2, 3Di, 760i RAW on vectran luff cable for bottom up furling
Solent: 72m2, 3Di 760i (39,800 dpi), Hank On,
Staysail: 41m2, 3Di 760i (35,000 dpi) roller furling on Vectran luff cable
MH0 reacher: 265m2, 3Di 760, 16,800 dpi, internal aramid luff cable for bottom up furling
R1 (New Jan 16): 3Di 87 Raw, 8820 Dpi, internal luff cable, top down furling
A3: 350m2, laminate, designed for external aramid luff cable for top down furling.
A4: 400m2, SK150, designed for external luff aramid luff cable, top down furling
A1: 358m2, NDPO 69/49 (polyester) designed for external aramid luff cable, top down furling
Fractional reacher: 186m2, 3Di, 16,800 dpi, internal aramid luff cable bottom up furling
Mast, Boom, Forward Beam and Longeron Prepreg Carbon by Southern Spars New Zealand
Standing Rigging is EC6 by Composite Rigging
Running backstay are aramid
All of Extreme H2O power requirements such as refrigeration, instrumentation, lighting, winches are run easily run from the battery bank. The large inverters allow use of Aircon throughout the night without the use of generators. The boat has a battery operated powering range of 45 minutes without the use of generators.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.