JP3 upper and lower self-aligning rudder bearings.
Engine & Gearboxes:
1 x Yanmar 40hp diesel engine with a sail drive.
Engine box with integrated bottom steps.
Engine Hours: 473.8 as of July 2016, with a full service history
Propulsion & Steering:
Gori folding 2-bladed prop.
Spinlock flush throttle control with detachable throttle lever.
2 x McConaghy bullet head wheel pedestals, and wheels, completed with carbon offshore grab rails.
Emergency steering: Carbon tiller with stainless steel end fitting.
12v DC switch panel; battery isolator/selection switch.
2 x House batteries.
1 x Engine battery.
Freshwater hand pump at galley sink.
2 x Manual bilge pumps.
6 x Electric bilge pumps.
Fuel tank total capacity of 60 litres in 1 x rigid plastic tank.
B&G H3000 electronics, with forestay loadcell.
Simrad VHF with a handheld unit.
AIS transmitter and receiver.
Fleet 150 Broadband system.
Custom one burner stove for a jetboil.
Storage nets and pockets throughout.
Lightweight WC in moulded compartment.
Red/white LED cabin lighting in saloon, galley, heads and navigation areas.
Navigation Lights; pulpit and pushpit mounted.
Summary of Accommodation:
8 x Pipecots.
Interior Finish: Lightweight racing paint finish in satin white to living area. All other areas are sprayed in a light weight clearcoat racing finish.
Under cockpit navigation area and seat.
Enclosed head surround.
Southern Spars Ultra High Modulus carbon rig – reinforced and repainted in 2016.
2 x Sets of Ultra High Modulus carbon spreaders.
Nitronic 50 standard rigging (2012).
PBO backstays (2012).
Southern Spars High Modulus carbon boom.
2 x Reef lines with integrated clutches.
Harken twin groove head foil, with spare.
Bullet locks on main and jib.
Harken Pro-Trim traveler system.
7 x Spinlock clutches along the custom organizers.
String drop system lead to primary winches.
1 x Mainsail halyard.
1 x Fractional Jib halyard.
1 x Fractional spinnaker halyard.
2 x Masthead spinnaker halyards.
Sheets + Purchases:
1 x Mainsheet.
4 x Spinnaker sheets.
4 x Jib sheets.
Main + Jib cunninghams with purchases.
Jib car inhaul adjusters with purchases.
Jib lead up down adjusters with purchases.
2 x Reef lines.
2 x Spinnaker tack lines.
1 x Bobstay.
Carbon fibre aero foil pushpits + pulpits.
10 x Carbon fibre round stanchions.
4 x Clear dinghy hatches in cockpit sides for rope stowage.
Sliding fore hatch with inflatable seal.
Center-point lift attachment on keel head.
Custom made square fenders, large size.
Covers for boom, winch and wheels.
2 x Driven primary winches Harken 65.3 STR.
1 x Harken 2-speed MX Pedestal mounted AFT of traveler (upgraded from standard).
1 x Pit winch Harken 46. SPT.
2 x Main sheet winches Harken 50.2 STP.
2 x Backstay winches Harken 45.2 STP.
4 x Carbon winch handle pockets.
2012 3Di main with one reef.
2012 3Di J1, J2, J3 and J4.
2012 Storm + Trisail.
2012 Spin staysail on furler.
2012 3Di genoa staysail.
2012 A1.5, A2, A3, A4 and A5 (frac).
2012 Code zero on furler.
2015 A2 + A4.
2015 J1 + J2.
2015 Inshore Main.
2015 Offshore Main with two reefs.
Stainless steel 1/19 wire lifelines.
Liferaft for 12 people in carbon canister.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.