Price just reduced. This well maintained & lightly used 2010 (launched 2011) Adventure version Dufour 325 Grand Large is packed with extras including Raymarine C90W chartplotter, Raymarine autopilot, AIS, ST60 Tridata + Wind, VHF, Eberspachar heating, sprayhood, folding propeller, ropecutter
Please contact at Hamble 023 8045 3245
Características adicionales, equipo e información:
Diseñador: Umberto Felci
Forma del casco: Monocasco
Eslora total: 9.85 m
Manga: 3.40 m
Eslora en la flotación: 9.28 m
Calado mínimo: 1.85 m
Calado máximo: 1.85 m
Desplazamiento: 4700 Kilogramos Sin carga
Peso seco: 4700 Kilogramos
Potencia Total: 19 HP
Marca del motor: Volvo Penta
Año de construcción: 2010
Modelo del motor: D1-20
Tipo de motor: Intraborda
Tipo de motor/combustible: Diesel
Hélice: Hélice abatible
Tipo de transmisión: Sail drive
Potencia del motor: 19 HP
Número de depósitos de agua dulce: (160 Litros)
Número de depósitos de combustible: (90 Litros)
Número de depósitos de aguas negras: (45 Litros)
Número de literas dobles: 2
Número de camarotes: 2
Número de aseos: 1
Circuito eléctrico: 12V
12 V DC system.
Switchboard with circuit breakers, voltmeter, 12V outlet
Two x 32.2 ST Genoa winches on coamings close to the helmsman.
Aries 700 electric windlass
Electric bilge pump
Manual bilge pump
Deck flood light
The interior has a two cabin, one head layout with a large fore cabin v shaped berth and large double aft berth
Forward & aft berths 2m in length
The L shaped galley and forward facing chart table are large for this size of boat, with plenty of stowage. The heads are a good size, with large access through to the starboard cockpit locker to allow use as a wet/sail locker
Eberspacher heating with four outlets
45 litre holding tank
20 litre pressurised water heating
Sea water foot pump
L-shaped galley with a large worktop in Corian
Stainless steel sink
Chrome plated brass mixer tap for pressurised water
Cooker with a two burner stove with oven on gimbals
12V refrigerator unit with minimum capacity 120 litres, stowage box, and separation
Crumb tray under sole
All joinery work is in prime Moabi mahogany, with fiddles, mouldings and framings in solid wood
Both cabins have hanging wardrobe space in addition to storage shelves
Soles are in Moabi laminated floor boards
Saloon cushions in cream
Saloon table with bottle rack, fiddles and cutlery drawer
Saloon seating with stowage under seats and behind backrests
Aft cabin mattress replaced in 2012 with a custom made mattress
Hand laminated GRP hull.
NPG gelcoat, the first layer of cloth impregnated with NPG resin, forming an optimum barrier against osmosis.
Inner moulded hull bottom, structural grid laminated to the hull. Hull portlights in saloon.
Deck in PVC foam core sandwich, moulded by injection process (Resin Transfer Moulding) giving significant weight saving and an excellent interior finish.
Draft: 1.85m, cast iron keel, bolt loads taken up by stainless steel backing plate.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.