Superbe Sly 42 équipé régate, idéal course croisière ou croisière rapide
Please contact Christophe François at +33 7 62 86 33 11
Características adicionales, equipo e información:
Bandera del barco: France
Forma del casco: Monocasco
Eslora total: 12.75 m
Manga: 3.78 m
Eslora en la flotación: 11.13 m
Calado máximo: 2.49 m
Desplazamiento: 6387 Kilogramos
Lastre: 2345 Kilogramos
Peso seco: 6386 Kilogramos
Potencia Total: 29.83 KW
Tipo de motor: Intraborda
Tipo de motor/combustible: Diesel
Potencia del motor: 29 KW
Número de depósitos de agua dulce: (320 Litros)
Número de depósitos de combustible: (170 Litros)
Número de literas dobles: 3
Número de camarotes: 3
Número de baños: 2
Equipo de viento
Central de navegación
Altavoces de bañera
Timón de rueda - carbone
Cargador de baterías
Bomba de achique eléctrica
Bomba de agua salada
Toma de puerto
Cubierta lateral en Teka
Teca en bañera
Capota de mal tiempo
- Capote de roof
- Mat carbone avec Mast Jack
- Bout dehors Carbone
- Barre a roue Carbone
- Passerelle Carbone
- Guindeau électrique avec 35 mètres de mouillage
- Support moteur de balcon
- Armement de sécurité hauturier 8 personnes
- 1 batterie moteur 44 Ah
- 2 batteries de servitude 240 Ah
- Grand-Voile quantum 2013
- Génois médium quantum 2013
- Spi Asymétrique médium 2013
-Spi Asymétrique lourd sur chaussette pour la croisière
Travaux Récent :
- Gréement dormant en ROD 2015
- Safran plus structure de quille renforcé par chantier
Manufacturer Provided Description
Sly 42 is a Fast Cruiser with racer performance, but with ease of manoeuvres marking it as a winner for tranquil pleasure sailing, even with a crew of just two. Offers motor-powered manoeuvring agility and excellent liveability in both its interiors and on deck.
The transom has a vacuum bag-processed 9 mm teak bathing platform, a removable bathing ladder easily folded and stowed, hot and cold water shower and a 220V socket.
The navigation light is fitted to the pushpit.
The boat has 7 stowage lockers:
1 deep aft locker offering ample stowage
2 side lockers in the cockpit seating, easily accessible and extending to broadside
2 side lockers aft of the steering on the cockpit sides
1 central locker with capacity to contain a self-inflating 10-seater raft and large gas bottle
1 forward locker for sail stowage
Pulpits and stanchions
The pulpits and stanchions are in 25 mm diam, 2 mm thickness, mirror-finish AISI 316 stainless steel tubing, with two guardrails in 5 mm diameter stainless steel cable with own rigging screws.
Pulpit and guardrail height 610 mm.
The forward and aft pulpits are in two sections, custom built according to the deck plan.
The standard version interiors include 3 cabins (1 forward, 2 aft) and 2 bathrooms.
The fittings arrangement guarantees easy movement from one part of the yacht to the next, considerable stowage space, comfort and class.
The furniture is in composite with visible sections in teak and enamelling; all furniture items are equipped with push-pull opening mechanisms.
All frame trims are in lamellar or solid wood.
The light colouring of enamelled sections along with the timberwork provide the interiors with a sensation of a light-filled, spacious atmosphere.
The 12V electrical circuit is supplied via two 120 Amp service batteries.
A voltmeter and ampmeter provide good battery management.
Supply networkSpecific strips are set into the counter-moulding of the deck and hull to provide integrated lighting to both the deckhead lights and the various electrical devices (pumps, windlass, navigation lights, ...)
Via the alternator (power dependent on motorization) is attached to the engine.
Quick 40Ah battery-charger, 220V supply (via socket) protected by a circuit breaker.
A 12V, 16-mode rear-lit electrical panel (with identification label) is located above the chart table.
A cigar-lighter socket is located below the panel.
The electrical panel also provides information on water and diesel consumption.
Lighting and sockets
Halogen lighting (spotlights and reading lamps) provide light to the various spaces for greater comfort.
1 service light in the forward sails locker
2 spotlights in the forward berth
2 reading lights in the forward berth
2 spotlights in the head compartment
11 spotlights in the saloon
2 spotlights over the galley
1 chart table light
1 spotlight in each aft cabin
1 reading light in each aft cabin
Navigation, engine and deck lights A number of sockets are fitted (in the cabins, galley and above the charts table).
The work surface is in stainless steel with high coaming in solid wood around the work surface to avoid falling objects.
The double sink is in stainless steel with mixer tap.
The inbuilt refrigerator with separate compartments has a 145 litre capacity.
Easy-access waste bin below the work surface.
Shelving unit below the work surface and drawer unit with container basket.
The gimballed 3-burner hob and oven have a steel burner-protection bar, tea towel holder and bottle container.
Cupboards with doors are fitted along the hull, above the work surface.
Crockery cupboard and 4 drawers.
The yacht is equipped with a sail-drive inboard diesel engine, mounted in a ventilated, soundproofed housing on a frame built into the hull structure. It was chosen in accordance with set Sly Yachts parameters (reliability, vibration control, reduced harmful gas emission).
Model and manufacturer: VOLVO D2-40Cycle: 4-stroke diesel
Power: 39.6 Hp (29.1 kW) at 3200 rpm
Ignition system: 12 V, 1.2 kW starter motor
Alternator: 115 A externalFixtures: Manufacturer-supplied flexible supports
Controls: Manufacturer-supplied single lever remote control; the engine controls are positioned to the right of the steering column.
Cooling: Liquid cooling with heat exchanger, fluid and seawater circulation pumps, seawater filter.
The propeller is a folding ?duck-billed? type, sized to the engine power and therefore contributing to the streamlined performance of the yacht.
The ignition and engine control panel is located to the side of the helm.
The engine control lever is integrated with the cockpit coaming.
The fuel tank is in HDPT (high density polyethylene) and is centrally located in the tunnel below the cockpit, between the two aft cabins; it has a 120 litre capacity and is equipped with an electrical level indicator.
A 44/180 Ah starter battery is specifically dedicated to engine ignition.
Steering: The Jefa double steering, with cable transmission, is composed as follows:
1.000 mm diameter aluminium wheels
Aluminium steering columns
Aluminium quadrant with autopilot link
Three stainless steel cables
Aluminium emergency helm
The metal wire and chain steering system is linked to the aluminium drive shaft section for a better overall sensitivity-weight ratio.
The German mainsail sheet reels to below deck and up to the winches
1 2.1m Harken mainsail track
1 Harken mainsail bearing carriage
Harken vertical cockpit block
Harken boom end block
2 Harken boom gooseneck blocks
2 Harken deck entry blocks
2 Harken deck exit blocks
Genoa system: The genoa system is composed of:
1 furling gear drum retractable to below deck
2 1.2m Harken genoa tracks
2 Harken genoa bearing carriages
4 Harken genoa sheet return blocks
Vang and stoppers fixed to the deck at each side of the coachroof
4 Harken 1965 mainsail sheet return blocks
9 Harken below mast blocks
6 Spinlock double stoppers
3 Harken return blocks
The standard winches are self-tailing, aluminium winches produced by Harken:
2 x 44.2 STA halyard winches on the coachroof and to each side of the hatch.
2 x 53.2 STA genoa sheet winches on the cockpit coaming
2 x 48.2 STA mainsail winches.
2 winch handles supplied.
Ports and hatches
All ports are produced by Lewmar (Low Profil series for the panels).
The glass is fitted with an exclusive watertight system.
The frames are in anodised, anti-corrosion aluminium.
To each side of the coachroof are two large, vacuum attached ports in 10 mm polycarbon, which offer extraordinary natural lighting in the interiors.
2 60x60 cm LEWMAR hatches
2 40x30 LEWMAR openable ports on the coachroof
2 40x20 cockpit ports
2 side ports on the coachroof
1 sliding entry hatch in 12 mm Perspex, teak frame and runners
The aft gear includes a removable stainless steel bow fitting with bow roller to allow navigation with fully raised anchor.
The self-draining anchor well is closed by a hatch cover and is fitted with a 1200W electric windlass.
4 Versari Dal Monte cleats in fold-away, deck-bound anodised aluminium:
2 forward cleats
2 aft cleats
The hull and deck are in recessed mould sandwich with E-glass and carbon fibre surfacing, and frame in PVC and epoxy resin, the latter guaranteeing hull protection against osmosis.
The hull, deck and cockpit will have a white gel-coat finish.
On the coach roof, cockpit deck and walkways, a non-slip finish is provided by a special coat of ice white ?Awl-Grip?.
The bulkheads are in 27 mm ?Laricross? sandwich panelling, except for the mast bulkhead which is in composite.
The structure, with recess-moulded frame floor with biaxial structures in E-glass and unidirectional structures in carbon fibre laminated with epoxy resin, ensures the spread of all stress and pressure points to guarantee equal and reduced strain on the hull.
The hull and deck are glued on a 120 mm overlay flange.
The toenail is produced in solid, unvarnished teak, screwed and glued to the hull
The keel is composed of a foundry-moulded cast iron fin produced from a numerically controlled milled model as support to a lead bulb.
The fin is fixed to the hull by means of stainless steel tie rods and bolts and a stainless steel plate resinated in glass fibre.
The bulb is produced from an alloy of lead and 3% antimony, foundry-moulded from a numerically controlled milled model.
The bulb is also reinforced by internal caging in stainless steel rod.
The rudder is composed of a rectangular-section carbon fibre shaft produced in autoclave with pre-pregnated fibres rotating on two self-aligning bearings.
The blade is made from numerically controlled recess moulding with unidirectional and biaxial fibres in E-glass laminated with epoxy resins.
Bilge:3 electrical/1 manual pumps
Freshwater autoclaves: 1 electrical pump
Waste water: 1 electrical bilge macerator pump
Two electrical pumps for shower discharge.
The fresh water circuit is composed of a Jabsco 14 litre per minute circulation pump with manostat and expansion chamber.
2 customized 180 litre HDPT (high density polyethylene) tanks, located to each side of the saloon, are fitted with inspection hatch and deck fill/discharge.
Hot water is supplied by a 20 litre boiler operating by means of both 12V circuit electrical resistance and a heat exchanger connected to the engine circuit.
The taps and shower heads are fitted with mixers.
The PVC pipes with rapid-mount joints are in red for hot water, blue for cold water, and have an identification plate at each end.
Designed in accordance with category A EC directives and with the requirements of ABS (American Bureau of Shipping) certification.
Sophisticated software was used for the optimization of waterlines, weights, structures and sail plan:
testing tank verification
finite element analysis
fluid dynamics simulators
La société offre les informations relatives à ce navire de bonne foi mais n'est pas en mesure de garantir l'exactitude de ces informations ni l'état du navire. Il revient à l'acheteur d'instruire ses agents ou ses experts afin de vérifier et de faire valider les informations de son choix. Ce navire est offert sous réserve d'une vente préalable