This is a 320' state-of-the-art High Speed RoPax ferry built by Incat of Australia in 2006. Passenger capacity is 900 and vehicle capacity is 267 cars or 90 cars with 380 lane meters for trucks. The vessel is DNV Class, fully certified and fully operational. Service speed is 40 knots and max lightweight speed is 48 knots. The vessel has active ride control system for comfortable operation in rough conditions and waves. The interior is modern, stylish and comfortable with spacious public spaces,stores and restaurants. This is the finest and most recently constructed large High Speed RoPax Ferry available on the world market.
Additional information and photographs available upon request.
Builder: Incat Tasmania Pty Ltd.
Class Society: Det Norske Veritas
Certification: DNV 1A1 HSLC R1 Car Ferry “B” EO
Length Overall: 320’
Length Waterline: 92.00 m
Beam Overall: 26.62 m
Beam of Hulls: 4.50 m
Draft: 3.40 m
DWT: 725 tons, approximate
Passenger Capacity: 900 persons (including crew)
Vehicle Capacity: 380 truck lane meters at 3.1m wide and 4.35m clear height plus
90 cars at 4.5m length x 2.3m wide or 267 cars only using optional
Speed: Approximately 40 knots at 1450 tons displacement
Note: All speeds quoted at 100% MCR 4 x 7200 kW @ 1000 rpm without
deployment of T-foil, with clean underwater parts and in water depths of
10 meters to 50 meters.
Max Deadweight - Approximately 725 tons
Passenger Capacity - 900 persons (including crew)
Passenger Deck -
located on one level, the Passenger Deck is divided into three lounges:
• Aft Lounge with seating areas, Bar and Male/Female Toilets.
• Midship Lounge with seating areas, Kiosk, Food Preparation Area and Shop.
• Forward Lounge with seating areas, Bar, Male/Female Toilets, Disability
Toilet/Mothers Room, Crew Room and Crew Wash Room.
Vehicle Capacity –
380 truck lane meters at 3.1m wide and 4.35m clear height plus 90 cars at 4.5m length x 2.3m
wide or 267 cars only using optional mezzanine decks.
P.O. Box 752 Port Washington Blvd.
Port Washington, NY 11050