Dreams Come True is an absolutely beautiful Oyster 56, superbly maintained by her owner since new. She features a fully battened mainsail and cutter rig, yet is set up for short handed sailing, whilst offering exceptional performance. Never chartered and only two owners from new. Teak interior, with a very high specification. To be sold at the end of the Oyster World Rally. Dreams Come True should be viewed to be fully appreciated.
HULL NUMBER: Oyster 56/37
HULL CONSTRUCTION: Hand lay-up GRP, single skin with structural stringers and floors to Lloyds approved design specification.
HULL FINISH: White hull with cove line and double boot top lines in standard Oyster blue.
DECK CONSTRUCTION: Deck structure moulded in GRP with balsa core.
DECK FINISH: Teak laid decks, bulwark finished with natural teak capping rail.
KEEL: High Performance Bulb (HPB) external lead keel.
RUDDER: Rudder protected by full-length skeg.
STERN DESIGN: The stern design incorporates a bathing platform trimmed with teak slats and stainless steel steps with teak treads for access to the stern deck.
EU RCD: Built to comply with the requirements stipulated in the European Union’s Recreational Craft Directive to meet Design Category A – ‘Ocean’.
CHARTER CODING: Built to MCA Category 2 with all associated safety equipment fitted.
2. DECK LAYOUT AND EQUIPMENT
ANCHORS: 34 kg CQR anchor and 70m of 12mm chain and 50m of Octoplait. 20kg Bruce kedge anchor, stowed in the anchor locker and 100m of 18mm Octoplait nylon warp and 10m of 12mm chain tail. 20kg kedge anchor and 10m of chain and 100m of Octoplait.
WINDLASS: Lewmar Ocean 3 vertical capstan type 24V electric anchor windlass, including remote windlass controls in cockpit.
DECK ACCESS: Midship gateway stanchions with stainless steel hinged boarding ladders which close up to form the side-gates and gate to pushpit. Extendable transom ladder to be 600mm below waterline. 3m alloy folding passerelle, including sockets in top rung of steps down to bathing platform and in pulpit for bows-to mooring.
HATCHES: Vertical drop down washboard with shock cord. Lewmar alloy-framed deck hatches. Gebo alloy-framed coaming portlights. Gebo opening hullports, including deadlights.
CANVASWORK: Sprayhood to main companionway, Colour: Dune, including leather covered stainless steel grabrail to aft edge. Bimini, including stowage bag, Colour: Dune, including clear panel and Velcro flap for boomlight and above wheel. Covers for cockpit table, pedestal and wheel in acrylic, Colour: Dune. Custom made cockpit cushions – Acrylic covers and closed-cell foam, Colour: Dune.
DECK PLUMBING: Hot and cold freshwater deck shower in starboard transom locker. Anchor/deck wash. Freshwater washdown off boats’s pressure system – outlet in anchor locker with hose to reach full length of boat including trigger head.
COCKPIT: Stainless steel mugrack on pedestal. Teak stand with removable 30° wedges at both ends to assist the helmsman when the boat is healing.
COCKPIT TABLE: Varnished cockpit table in teak with stainless steel frame, folding leaves, and central insulated refrigerated icebox. Frigomatic DC refrigeration with keel cooler.
STEERING: 1200mm diameter stainless steel wheel and friction brake. Whitlock cable system with a remote “Athena” pedestal. Leather wheel cover.
OUTBOARD CRANE: Novalift II outboard crane on port aft quarter.
OUTBOARD BRACKET: Enclosed style port side of pushpit forward end.
DAVITS: Simpson Davits S225, manual, tall configuration with 225kg capacity.
GENERAL: Scandinavian style open pulpit with teak seat/step, stainlesss steel pushpit. Oyster custom stainless steel mooring cleats, including extra aft deck mooring cleats and aft caprail fairleads for stern to mooring. Stainless steel grabrails on cabin top. Mast guards. Lazarette locker with twin stainless steel gas struts to lid. Liferaft stowage in starboard side of stainless steel pushpit. Quarter pushpit seats in teak and stainless steel. 2m stainless steel antenna pole on the starboard transom. Stowage compartment, with removable partition, at forward end of anchor locker for kedge warp and chain stowage.
3. RIG AND SAIL HANDLING
MAST and RIGGING: Rig – cutter. Hood slab reefing mast with Fredrikson batten cars. Fully battened mainsail with lazyjacks, and Hood boom with spare batten stowage. Painted white. Extra conduit to masthead. Mainsheet kicker and topping lift to come aft into cockpit, reefing lines and outhaul to dedicated electric winch to port of mast. Solid rod vang. Navtec hydraulic backstay adjuster with manual operating panel in cockpit and mechanical lock off. One pair of mast steps 4 feet from mast head and second pair between deck level and boom gooseneck. Second staysail halyard for redundancy / storm jib, including mast sheave and exit. Second spare mainsail halyard. Tri Sail track on mast. Second Yankee halyard – 12mm spectra. 2 x ‘No strike’ ion dissipators at masthead. Standing rigging stainless steel 1 x 19 wire rigging. Navtec stainless steel tubular covers for cap shrouds and babystay. Leather covers to innerstay bottle screws and spreader ends.
HEADSAIL FURLING: Foresail furling – Harken MK III, manual. Staysail furling – Harken MK III, manual.
WINCHES: Lewmar, self-tailing - 2 x 66 CEST primary winches, push buttons on outboard face of cockpit coaming. 2 x 54 CST secondary winches. 1 x 48 CEST electric mainsheet winch under sprayhood. 2 x 16 CST two-speed mainsheet traveller control line winches. 2 x 48 CST two-speed main and genoa halyard winches on mast. 1 x 48 CEST electric winch on deck to port of mast.
SPINNAKER GEAR: Single spinnaker pole stowed vertically on mast. Package includes chainplates, Wichard folding padeyes, Spinlock rope clutches, two halyards, sheets, guys and blocks, topping lift and downhaul. Second Spinnaker pole with topping lift, mast track, line drive pole heel lift and mast clutch. Mast sockets for retro fit jockey pole.
SAILS: North sails, new in 2010. Mainsail, fully-battened. Light weight cruising spinnaker. Storm Jib.
GENERAL: Seven berths in four cabins, excluding the saloon. Interior joinery finished in teak. Designed to be modern and co-ordinated, whilst remaining practical and durable at sea. Essential features include sculpted fiddles and grabrails, ‘shadow-gap’ joints between panels and Oyster custom knobs for lockers and drawers. ‘Chequer-board’ style teak cabin sole. Sole boards serviced and protected in December 2013. Surfaces in galley in Avonite with upstands, colour: Nougat and in heads in Avonite, colour: Sandpiper. Headlining in off-white vinyl. Upholstery – Alcantara, colour: Amberglow. Washable loose covers for saloon and navigator seating. Lee screens on sea berths. Two director’s chairs with storage. Curtains system to windows in all cabins. OceanAir “Skyscreens” to all deck hatches. Flyscreens for all Gebo hull and coachroof ports. Hella fans in cabins, galley and workshop.
DOUBLE CABIN: Provides a spacious double cabin in the bows, with a centerline double berth, upholstered seat with vanity table, plentiful clothes lockers and a hanging locker.
TWIN GUEST: To port, with wider than standard upper and lower berths, lockers for clothes, a vanity unit, and hanging locker.
FORWARD HEAD: To starboard, shared by both forward cabins, accessed from passageway, incorporating a Sealand Vacuflush toilet, washbasin and separate shower stall. Hans Grohe mixer taps and shower controls. Towel rails, mirror, and a shaver socket.
SALOON: The saloon features an oval table in teak veneer with cream inlay border, including two handhold cut outs, and settee area to port, outboard of which are a pair of lockers and a central shelf to the hullports with stainless steel rods to make book rack. To starboard is another settee. The bar unit accommodates glass and bottle stowage.
WASHER / DRYER: Bosch WVF2000 washer / dryer in forward starboard locker.
NAVIGATION AREA: The chart table can accommodate a half-folded Admiralty chart. There is a bookrack outboard at the hull-side. AC and DC electrical panels are located aft of the navigator’s bench seat. Beneath and behind this seat are fuses and access to electrical breakers.
WORKSHOP/CABIN: Cabin fitted with single berth cabin / workshop, including workbench to allow for clam-on vice with rubber mat. Workshop door to open out forward into step recess by chart table.
GALLEY: The galley is located to port of the cockpit. All galley work surfaces are finished in Avonite, that provides a stylish, hardwearing and attractive finish to protect the surrounding timber. A large rubbish bin is fitted inside a locker door. Teak mugrack for nine mugs.
SINKS: Twin stainless steel sinks, including Seagull IV water filter on cold water supply.
COOKER: A gimbaled electric Force 10 3 hub cooker.
MICROWAVE: AEG Micromat 900W stainless steel combination microwave / grill / oven.
REFRIGERATION: A front-opening refrigerator and a top-opening freezer. Frigomatic 50F twin
compressor with twin plate for freezer, compressors direct water cooled.
DISHWASHER: Fisher and Paykel DS603 dishwasher.
OWNER’S STATEROOM: The aft cabin is configured with a double berth offset from the centerline, a curved settee, dressing table and a large hanging locker, with abundant drawer and locker space. Recess to forward bulkhead to house TV locker, and stainless steel rods to make book rack. From this cabin there is access to starboard to the en-suite head and to port to the galley.
EN-SUITE HEADS: To starboard with a Sealand Vacuflush toilet, a washbasin, and a separate shower stall. Hans Grohe mixer taps and shower controls. Towel rails, a mirror, and a shaver socket.
SOUND SYSTEM: Pioneer Single CD / radio stereo system, interfaced with AUX input from Linn Classik. Bose 131 cockpit speakers.
SALOON: Sharp Aquos 20” Flatscreen TV, flush mounted in TV locker in saloon. Status omni directional
aerial at masthead. Linn Classik DVD/CD player in saloon TV locker with stowage for CDs and DVDs.
I-pod 40GB and cables linked to PC and Classik.
OWNER’S STATEROOM: Sharp Aquos 20” Flatscreen TV in owner’s stateroom. Toad 12V DVD
including IR eye in owner’s stateroom in locker behind TV, connected via amplifier to a pair of Linn
Deskreet speakers in the headling.
ENGINE: Perkins / Sabre M115T. Parallel plumb engine and genset Racor filters in workshop so both can run off a single unit, including vacuum gauges.
ENGINE HOURS: Approximately 3200 @ April 2014.
PROPELLER: 3-bladed 24” diameter feathering Max-Prop.
ROPE CUTTER: Ambassador AM15 rope-cutter on propshaft.
ALTERNATORS: Yanmar 55A 12V alternator. 175A 24V alternator.
GENERATOR: Cummins Onan generator, new July 2011.
GENERATOR HOURS: Approximately 1140 @ April 2014.
BOWTHRUSTER: Sleipner 10hp tunnel bowthruster, including GRP ‘eyebrow’, control panel on steering pedestal.
AIR CONDITIONING / HEATING: 220V Cruisair reverse cycle system, comprising of 16000 BTU units each in saloon, in owner’s stateroom, for both forward cabins, with black SMX digital controllers and single water circulating pump.
WATERMAKER: Seafresh 206A watermaker 220V AC 95 litres per hour, including permanent connection of SeaFresh service / flush system.
7. TANKAGE AND PLUMBING
FUEL: 1050 litres approximately (230 imp/277 US gallons) in GRP tank.
WATER: 950 litres approximately (210 imp/250 US gallons) in GRP tank.
TANK TENDER GAUGES: Tank Tender system for 2 fuel and water tanks in workshop.
HOT WATER: From an insulated approximately 76 litres (16 imp/20 US gallons) tank heated by the engine’s heat exchanger, or by thermostatically-controlled 220V, 2kW immersion heater elements powered by the generator or dockside power.
PRESSURISED HOT AND COLD FRESHWATER SYSTEM
HOLDING TANKS: Polypropylene holding tanks to both heads, with Wema gauges and gravity discharge or deck pump out system.
MANIFOLD SYSTEM: Standard seawater inlets upgraded to a stainless steel manifold system so that intakes are via two seacocks with oversized strainers and manifold system.
SHIP’S SUPPLY: 24V.
RINGMAIN: 220V AC ring main with seven double, 3-pin Clipsal outlet sockets located as appropriate within the layout.
OTHER ELECTRICAL SOCKETS: 12V cigar lighter type sockets at chart table, in twin guest cabin, and owner’s stateroom. Waterproof 12V socket and plug in port aft deck locker suitable for dinghy pump. 24V 2 pin Dri-Plug at pedestal with permanent live connection.
BATTERIES: Domestic: bank with 4 x 6V 20 hr rated, and 4 x 6V additional 230 hr ‘deep-cycle’ batteries. Engine start: 2 x 88Ah 12V batteries. All batteries replaced in 2014.
BATTERY MANAGEMENT: Mastervolt 220V MASS 24/100A battery charger. Mastervolt System manager panel with battery monitoring. Engine start to Service battery 24V ‘emergency’ link.
INVERTER: Mastervolt 24V/2500W Sinewave inverter.
SHOREPOWER: 30A dockside power cable. Hubbell socket in coaming. Second 220V/30A shorepower cable and socket for aircon leads.
INTERIOR LIGHTING: Downlight type halogen lights in polished chrome finish, with downlightersover reading areas. Adjustable halogen lamps in headlining above headboard in owner’s stateroom, and above the saloon bulkhead. Flourescent lights and down-lights in each heads, as well as over the galley work surfaces. Reading light for each berth. Automatic light to drinks locker. Auto door light in owner’s stateroom hanging locker. Red LED ‘courtesy’ footlights at deck saloon steps. Red Halogen overhead night light over galley. Flexi chart reading light at navigation station with red / white shade.
EXTERIOR LIGHTING: Boom light, with rubber-covered toggle switch at pedestal. Spreader lights and foredeck light – facing down. Light in lazarette. Aqua signal 41 stern navigation light. Steaming/deck floodlight. Tri-white anchor/navigation light at masthead.
9. NAVIGATION AND COMMUNICATION
COMPASSES: S.I.R.S. Major 150mm diameter compass with internal lighting.
SAILING INSTRUMENTS: Raymarine ST60. Speed, Depth and Analogue wind direction; Multi-function display; close hauled Analogue wind; Raymarine RL70C Plus radar/plotter repeater mounted in 4-way swivel NavPod at companionway console. Multi-function display at pedestal. Multi-function display; Analogue Wind; ST7001 control head; Dual C-Map reader, linked to PC at chart table. Multi-function display in owner’s stateroom.
GPS: Raymarine Raynav 300 GPS, antenna on transom pole, including second GPS antenna with manual switch-over.
RADAR / CHART PLOTTER: Raymarine e95 with 9” HybridTouch in cockpit and Raymarine E125 Hybrid Touch Plotter at chart table with 12” screen,4 kWradome on mast and GPS interface.
AIS: Raymarine AIS.
AUTOPILOT: Raymarine Autopilot with ST7001 control head. ST600R handheld control for autopilot.
WINDEX: Windex at masthead.
NAVTEX: Furuno NX300.
VHF RADIO: Raymarine VHF at chart table, with handset and speaker on pedestal, and horn for hailer/foghorn function.
SSB RADIO: Furuno FS-1570 SSB with audio connection to PC for weather fax. Copper strip and two large ground plates as SSB earth. Insulated backstay as aerial for SSB.
SATELLITE PHONE: Inmarsat-C Thrane TT-3022D system with Serial link to PC.
PHONE: Cell phone kit only with aerial on mast, data transfer for email via Bluetooth to PC.
PC: Dell Yacht PC under chart table, with Logitech wireless keyboard and mouse, Dell monitor, and Canon Printer.
LIFERAFT: Lifeguard 8-man liferaft in canister, Solas B grab bag.
EPIRB: Float free EPIRB on stainless steel plate at starboard aft pushpit.
RADAR REFLECTOR: Firdell Blipper radar reflector on mast. Sea Me radar transponder system – head mounted at chart table – transponder at mast head.
BILGE PUMPS: Submersible bilge pump Whale 9000 (6,936 litres/hr) with hi-level alarm on float switch, automatic activation of the pump from the alarm. 24V Fire Pump / Portable bilge pump with hose. Electric bilge pump Jabsco Maxi 3000 puppy. Henderson MkV manual bilge pump operated from within the cockpit.
DECK SAFETY: 2 x Horseshoe lifebuoys, with lights. Seago danbuoy. Webbing jackstays (Gold colour), with shackles to bases of forward and aft cleats. Raymarine life save system. MOB button. Emergency tiller.
FIRE EXTINGUISHERS: Seafire Automatic Fire Management system.
OTHER SAFETY FEATURES: Support boards under forward cabin berths can be used as storm boards on the main saloon windows. Watertight bulkhead door in double forward cabin. Active Antenna AA20 for DSC at masthead.
RIB/DINGHY: Avon Airdeck R340Dinghy, and 12V electric dinghy pump, including 4 x small Wichard Pad Eyes in front of the mast to lash down deflated dinghy.
WARPS AND FENDERS
CUTLERY: Oyster customised Sheffield stainless steel cutlery.
SAFE: Two brick safe.
HEYCO MARINE TOOL KIT
ASSORTED SPARES AND MANUALS
NB All personal belongings and all other items not expressly listed in the above inventory are excluded from the sale.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Suite B, Orwell House
Ipswich, Suffolk IP2 8NJ