The Elan 40 is a hi-tech design performance cruiser with the emphasis on top level performance to capture the spirit of the competitive sailor and at the same time offering the well appointed comforts and style for the enjoyment of the crew on board.
Designed to be responsive and fast in light wind, the boat easily handles various weather conditions with only a minimum adjustment of the sail area, a feature equally important to the cruising family as it is to the race crew.
Designed by top international yacht designer Rob Humphreys, the Elan 40 succeeds in combining modern technology and expertise with a respect for tradition, elegance, and stylish good looks. The deck layout of the Elan 40 reflects the many years of designing, building, and sailing experience that were put together to conceive this boat. The clean deck features the very best deck hardware available, while the ergonomically designed cockpit guarantees comfort for both the crew and the skipper. Down below the Elan 40 is just as thoughtfully designed and well-laid out. The high-quality joinery, flowing lines, and beautiful craftsmanship shine through in every detail.
Tupelo Honey has been continuously upgraded since it was new by Easom Racing & Rigging with the best running rigging and features such as push-button backstay control making it easy and efficient to sail and race.
This fine yacht is owned by an LLC. Consult your tax professional to determine the benefits that may be available to the buyer.
Designed by top international yacht designer Rob Humphreys, the Elan 40 succeeds in combining modern technology and expertise with a respect for tradition, elegance, and stylish good looks. The deck layout of the Elan 40 reflects the many years of designing, building, and sailing experience that were put together to conceive this boat. The clean deck features the very best deck hardware available, while the ergonomically designed cockpit guarantees comfort for both the crew and the skipper. The helmsman's seat cants forward to create easy boarding through an open transom as well as a raised platform for easier visibility. Down below the Elan 40 is just as thoughtfully designed and well-laid out. She can sleep six in two cabins: One large double aft, two V-berths forward and two in the saloon. The head is situated to port, aft of the navigator?s seat and opposite the galley, while the settees offer spacious comfort around a large dining table. The high-quality joinery, flowing lines, and beautiful craftsmanship shine through in every detail.
Headroom 1890 mm.
1 double berth 2200mm x 1800/350mm with 120mm high density foam mattress.
2 large hanging lockers.
2 large lateral stowage shelves.
Stowages under berth with top access.
2 reading lights with switch.
2 overhead lights with switch.
1 large deck escape hatch.
2 opening deck hatches.
1 double berth 2000 mm x 1800/1250mm with 120mm high density foam mattress.
1 large hanging locker.
1 large lateral storage shelve.
2 reading spot light with switch.
1 overhead light with switch.
1 opening cockpit portlight and fixed hull portlight with curtains.
Fuel tank (150 litres) under the berth of port side cabin.
Batteries under the berth of starboard side cabin.
Access to engine room.
AFT HEAD / BATHROOM:
Marine toilet secured with easy accessible inlet and outlet seacocks.
Washbasin with pressurized tap.
Stowage locker under the sink with access to seacocks.
2 stowage locks above washbasin.
Electric bilge pump for shower bilge.
Wet locker with drainage to central bilge.
1 overhead light.
1 opening deck portlight with curtain.
Large ergonomically U - shaped settee with cushions and backrests on starboard
side with stowage lockers and water tank (160 litres) underneath.
Centerline settee with stowage and water tank (100 litres) underneath on port
Large folding saloon table with stowage locker for bottles in the middle (auxiliary
double bunk as an option).
2 opening deck portlights with curtains.
1 large deck hatch in the middle of saloon.
Lockers and shelves along the hull on both sides.
4 halogen overhead lights with switch.
Access to engine room.
L - shaped working top.
Well insulated top opening 12V refrigerator.
Gimbaled 3 - ring cooker and oven with safety rail.
Mixer Tap with pressurized hot and cold water system.
Lockers and drawers for appliances, dishes and cutlery above and under the worktop.
2 opening deck portlight with curtain.
1 halogen overhead light with switch.
1neon light over the worktop.
Chart table 750 x 600mm.
Adjustable reading spotlight.
Panel for navigation instruments with voltmeter for batteries, fresh water and
fuel level indicator.
Bookshelf, lockers and drawers.
Navigators seat with stowage compartment underneath.
1 opening deck port light with curtain.
Plastimo binnacle compass Raymarine ST290 (x4) Data Displays –
Custom Mast Mount for 3 Data Displays
Raymarine ST290 (x1) Graphic Display
Raymarine ST290 Wind
Binnacle Mounted Instrument control panel and MOB button.
Raymarine C80 Nav Display, Chartplotter & GPS
VHF Radio with Remote wireless head. Navigation lights
3 x 100 Ah batteries (one for engine, one for anchor windlass/hydraulic backstay pump and one for house systems).
3 separate main switches and blocking diode.
All circuit are protected with individual magnetic circuit breakers.
Navigation lights: bi-color on pulpit, stern on pushpit, steaming, flood, anchor
and compass illumination.
110V shore power plug.
2 x 12V plug on the instrument panel.
Diesel engine 4OHP fitted with sail drive.
Stainless steel fuel tank of 150 litres (under berth in port side aft cabin)
Fuel filter with water separator.
Sea water filter.
Engine room is sound proofed and insulated with special foam to CE standard,
Engine compartment ventilation via 2 ventilators.
Folding two-blade propeller.
Excellent all round accessibility to engine.
Engine mounted on bracket, built into the inner moulding.
Engine alternator 55A.
Engine hour counter.
Central electric bilge pump with automatic float switch.
Manual bilge pump for forward shower bilge (option).
Hand operated bilge pump in cockpit with strainer in bilge.
2 stainless steel fresh water tanks (280 litres) in saloon.
Water heater of 28 litres (heat exchanger and 110v heater).
Electric fresh water pump.
3 kg butane - propane gas bottles.
30 mbar pressure - relief valve with a shut - off switch.
Gas installation using 8mm copper tubes.
Stainless steel steam head fitting with anchor roller.
Self bailing anchor locker with closing facility.
Electrical anchor windlass 1000W.
Stainless steel forward pulpit with integrated teak step.
Stainless steel aft pushpits with flagpole holder.
Stainless steel stanchions.
2 rows of stainless steel cable lifelines with turnbuckles.
2 stern aluminum mooring cleats with protection on toerail and two removable bow mooring cleats.
2 stainless steel grabrails on coachroof.
2 x deck organizers.
8 x Spinlock clutches.
2 winches on coachroof.
2 genoa sheet winches.
2 genoa sheet tracks with adjustable ball bearing genoa cars, adjustable from
cockpit also under tension.
Windward sheeting Harken mainsheet traveller track adjustable from cockpit.
Engine control lever to starboard of steering wheel
Engine dash board near steering pedestal.
Teak laid cockpit seats, cockpit floor and bathing platform.
Compass at the steering pedestal.
4 Winch handle pockets
2 cockpit lockers on port and starboard side.
2 lockers under port helmsman s seat.
1 gas bottle locker under starboard helmsman s seat, draining outboard.
Folding stern seat.
Bathing platform with integrated stainless steel bathing ladder.
Fresh water shower at transom.
Leather covered steering wheel (1400 mm in diameter).
Removable teak cockpit table
MAST / STANDING RIGGING
Silver anodized aluminum keel stepped mast.
Silver anodized aluminum boom.
Mast step fitting with blocks.
Harken Spinnaker pole rail.
Stainless steel standing rigging.
Rigid boom vang with gas spring.
2 sets of aft swept airfoil tapered spreaders.
Button control Hydraulic Backstay. Custom install and makes for easy control by the helmsman or main trimmer. This system is driven by a powerful electric hydraulic pump located near the mast-step.
All halyards and tensioners running to cockpit.
All halyards and the plastic reinforced electrical cable are running inside
1 jib halyard.
1 main 2:1 halyard.
2 genoa sheets.
Continuous main sheet system controlled from either side of helm position.
1 outhaul for main controlled from the cockpit
2 main sheet traveller car adjusting lines (custom).
2 genoa sheet car adjusting lines.
2 reefing lines - outhaul lead back to cockpit.
2 spinnaker halyards.
1 carbon fiber spinnaker pole.
1 aluminum reaching pole/strut.
SAIL INVENTORY (condition score 1-5) Darcon UK mainsail (2004) Excellent Condition (5) Furling 135% UK headsail (2004) Excellent Condition (5) No. 4 Dacron UK headsail (2004) Excellent Condition (5)
Racing Mainsail (2005) UK TapeDrive OK Condition (2)
All-Purpose Spinnaker, 2004 UK Good Condition (3) – Good for reaching.
Spinnaker Code 4S AIRX 700 (2009) OK Condition (2)
Spinnaker Code 2S AIRX 650 (2012) Very Good Condition (4) – Big running kite
Racing #1 (2005) UK TapeDrive OK Condition (2)
Racing Mainsail (2006) 3DL 600 M Mainsail Practice Condition (2)
Racing Mainsail (2013) 3Di 760 Dynema/Carbon) Good Condition (3+)
3DL 860 Light/Medium – OK Condition (2)
3Di 760 Medium/Heavy – Good Condition (3)
Mainsail and Wheel Covers
6 winch handles.
Several sheet blocks and shackles
2 fire extinguishers.
Wheel and Mainsail covers
Standard and Racing Anchors and corresponding chain and rode.
Assorted dock lines
The hull is a hand laid laminate. The first two layers of the underwater
section are laminated with isopthalic polyester resin for osmosis protection.
The deck is a one-piece laid fibreglass reinforced polyester laminate, partly
polyester - balsa sandwich for thermo and sound isolation.
HULL TO DECK JOINT:
The deck is glued to the flange on the hull, bolted through and laminated with
multi-axial fabric in transom and anchor area.
The 2550 kilograms fin keel and bulb deep-draft version (2.40m keel).
The balanced rudder is a fibreglass reinforced polyester laminate with rudder
stock and internal grid, both constructed in stainless steel.
CE - CERTIFICATION
The E40 has been built in accordance with the European CE - certification and meets the requirements of the CE - directive 94/25/CE for recreational crafts. These rules require a certain standard of hull and deck strength, structural bulkheads and stringer, keel and rudder and their attachment to the hull, safety and stability, engine and gas installation, sea cocks, manuals and documentation of all major installations.
Max Draft: 7.1 ft
The keel is solid iron fin with a lead bulb.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.
3300 Powell Street, Suite 105
Emeryville, CA 94608