1932 Chester Clement Downeast Picnic Boat
- Ver especificaciones completas
- Tipo de motor/combustible:
- Sencilla / Gasolina
- Situado en:
- Charlotte, VT
- Material del casco:
- Precio actual:
- US$ 149,500 (EUR 141,518)
MADDY SUE is a classic downeast design designed by one of the forefathers of the Picnic Boat movement. Built in 1932 by renowned Maine boatbuilder Chester Clement, the boat was restored in 2012-2013 at Darlings Boatworks in Charlotte, VT where she currently resides.
Gracing the cover of June 2014 issue of WoodenBoat, the feature article covers the story behind the refit of this classic vessel. The hull lines of this design were recorded by the National Park Service's Historic American Engineering Record after the boat was declared a historically significant boat type related to the very first Picnic Boats. Builder Chester Clement, before his untimely death, mentored Raymond Bunker at his yard at Southwest Harbor Maine who went on to design and build the sought after Bunker and Ellis line of yachts. Clements yard was later bought by Henry Hinckley in 1939 where Hinckley Yachts continue to run it's Southwest Harbor yard today.
This boat is history and beauty combined into one.
We are always in search of quality vessels to list, so if you are thinking about selling or upgrading, please email us to discover the difference that is Latitude Yacht Brokerage
Yacht Broker / U.S.C.G. Master Capt.
See what we are all about:
Please contact Tom Miller at 401-835-7215
Características adicionales, equipo e información:
Nombre del barco
Constructor: Chester Clement
Diseñador: Chester Clement
Eslora total: 36 Pies 1 Pulgadas
Manga: 9 Pies 1 Pulgadas
Eslora en la flotación: 34 Pies 7 Pulgadas
Calado máximo: 2 Pies 7 Pulgadas
Potencia Total: 140 HP
Marca del motor: Chris-Craft
Modelo del motor: ML
Tipo de motor: Intraborda
Tipo de motor/combustible: Gasolina
Número de horas del motor: 144
Hélice: Hélice 3 palas
Potencia del motor: 140 HP
Velocidad de crucero: 10 Nudos
Velocidad máxima: 13 Nudos
Número de depósitos de combustible: 2 (48 Galones)
Vessel refit was performed by Darling Boatworks in Charlotte, VT 2012-2013
- Steam bent white oak framing
- Hull cedar planked
- Decks- cedar planks plywood sheathed in fiberglass. Painted with Awlgrip and non-skid.
- Cabin, Windshield, and Helm Station - solid varnished mahogany -
- Transom - vacuum bagged lamination of three layers of 6mm marine plywood and 1/4" mahogany veneer
- Mahogany bench for the steering station and matching bench for aft deck built during refit. Design matches those of the ones on display of the model of this yacht on display in the Great Harbor Maritime Museum in Northeast Harbor, ME.
- cockpit sole - re-framed in white oak, and finished in new marine ply sheathed in fiberglass.
- all mahogany rub-rails, toe-rails and taffrails replaced during refit
- Most of old hardware including the helm instruments were able to be reused. 2 new bronze portholes were installed on the forward face of the cabin
- new engine bedlogs
- new shaft bearings
- Rebuilt 1950's vintage Chris-Craft ML, 6 cyl gas - 140 hp. (144 hours since rebuild)
- Crusing Speed - 12kts
- engine rebuilt by Van Ness Engineering : http://www.vannessengineering.com/
- 12V DC circuits
- 2x electric bilge pumps with bilge counter (Rule 1500 & Rule 3700)
- bilge blower
- courtesy lights
- LED running lights, cabin, and cockpit
- Standard Horizon VHF
- Garmin 541S chartplotter
- 2x GRP 27 Deep Cycle Batteries
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.